Image description

PO BOX 393

Jefferson, WI 53549

Phone: 800-422-7670

Fax: 414-354-5653

F-102 FLOOR SHIELD (Epoxy Floor Coating)

F-102 Floor Shield is a 100% solids epoxy floor coating designed to provide a protective shield to industrial floors.  It is highly resistant to most chemicals and abrasion.  F-102 Floor Shield provides a protective coating against wear, abrasion and chemicals.  It eliminates concrete dusting created from your everyday traffic.  F-102 Floor Shield makes your floor easier to clean with it's nonferrous coating.  In addition, with F102 Floor Shield on your floor, your plant will be brighter, without adding more lighting.  Overall, when you coat your floor with F-102 Floor Shield, it will make a healthier, cleaner, and brighter environment for your employees and your prospective customers.

ADVANTAGES:

  • Helps keep floor cleaner and brighter
  • Easy to apply with your own maintenance personnel
  • Fast cure time.  Return to traffic after 24 hours.
  • Low VOC,s.  VOC compliant in California and New Jersey.
  • Low cost when compared to contractors cost.

Order in 3 gallon units.  Each unit covers approximately 450 sq. ft. @ 8 mils

Recommended Primer: F-123 Epoxy Floor Seal or F-015 Water Based Epoxy Floor Seal.

COLORS:  Available in clear and all standard colors.  Special colors available.


PRICE
Lt. Gray, Gray, Charcoal Gray, Medium Gray, and Tan $290.19 per unit
All Other Colors $299.72 per unit



F-121 HD ANTI SLIP COATING

F-121 HD Anti Slip Coating is a 100% solid epoxy flooring system.  Use in wet or chemical area's to obtain a slip resistant floor surface.  F-121 HD Anti Slip Coating is resistant to most chemicals and abrasion.

ADVANTAGES

  • Provides tough, chemical resistant slip resistant surface.  You control the amount of roughness desired.
  • Easy to apply with your own maintenance personnel.
  • Fast cure time.  Return to traffic after 24 hours.
  • Low VOC,s.  VOC compliant in California and New Jersey.
  • Low cost when compared to contractors cost.

Order in units.  Each unit will cover approximately 300 sq. ft. @ 14-18 mils thickness

COLOR:  Tile Red, Medium Gray, Light Gray, and Beige


PRICE  $232.80 per unit



F-109 RESIL-LASTIC (Epoxy Floor Coating)

F-109 Resil-Lastic is a unique blend of 100% solids epoxy coating.  Due to F-109 Resil-lastic's unique blend of additives it will remain more flexible and resilient than other epoxy blends.  F-109 Resil-Lastic is able to withstand impact, abrasion, most chemicals and solvents, and extreme temperature changes.

ADVANTAGES

  • May be applied to concrete,wood, wood block and asphalt surfaces.
  • Seals surface to keep chemicals from seeping into base floor.
  • Stops tracking that is common on wood block floors.
  • Leaves a low gloss finish.
  • Easy to apply.  May be applied by your own maintenance personnel.
  • No long shut downs.  Return traffic to area after overnight cure.
  • Low cost when compared to contractors cost.

Order in units.  Each unit covers approximately 200 sq. ft. @ 8 mils on smooth surfaces.

COLOR:  Black  (May be top coated with F-102 Floor Shield or F-123 after cured for color)


PRICE
Two Gallon Units $159.34 per unit



F-123 EPOXY FLOOR SEAL

F-123 Epoxy Floor Seal is an economical floor sealer designed especially for area's where high chemical saturation is not a problem.  F-123 Epoxy Floor Seal has excellent abrasion resistance and is chemical resistant to mild acids, alkali and aliphatic solvents.  F-123 Epoxy Floor Seal may be used on concrete, wood, metal and brick floors.  F-123 Epoxy Floor Seal provides a durable, cleanable, and light reflective finish.  Use F-123 Epoxy Floor Seal in industrial plants, warehouses and garages.

ADVANTAGES

  • Helps keep floor cleaner and brighter
  • Easy to apply with your own maintenance personnel
  • Fast cure time.  Return to traffic after 24 hours.
  • Low VOC's. VOC compliant in  New Jersey.
  • Low cost when compared to contractors cost.
  • Easy 1 to 1 mixing ratio.  No need to mix entire unit at once.

Order in units.  Each unit will cover approximately 500 sq. ft. @ 5 to 6 mils, depending on porosity and type of surface being applied to.


COLOR:  Off-White, Light Gray, Medium Gray, Tile Red, Beige, White. 

Special Order colors available. Dark Gray, Brown, Light Blue, Blue, Green

 

PRICE
Standard Colors Listed above $156.67 per unit
Special Order Colors and Clear $166.67 per unit

 


F-015 EPOXY FLOOR SEAL (Water Based)

F-015 is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. F-015 has superb chemical resistance, abrasion resistance, and substrate penetration. Recommened for priming or coating concrete, wood or masonry. This product can withstand exposure to many common solvents and chemicals. F-015 Water Based Epoxy Floor Seal can be used as a stand alone floor seal. Top coat is optional.

ADVANTAGES:

  • Easy to apply with your own maintenance personnel
  • Fast cure time. Light foot traffic 16-24 hours.
  • Easy to mix, 4 to 1 mixing ratio. No need to mix entire unit at once. 
  • Helps keep floor cleaner and brighter.

Order in units. Each unit will cover approximately 550 sq. ft. @ 5 to 7 mils, depending on porsity and type of surface being applied to.

COLOR: Off-White, Light Gray, Medium Gray, Tile Red, and Beige

Special Order Colors: Dark Gray, Brown, Light Blue, Blue, Tan, Green and Amber Clear


PRICE
Standard Colors Listed above $156.67 per unit
Special Order Colors and Clear $166.67 per unit

 


floor coating color chart




F-124 FLOOR MAINTAINER

Use of harsh detergents on epoxy and urethane floors will eventually dull the gloss finish of your floor.  Now you can clean them without those harsh detergents, and at the same time maintain the gloss finish, with F-124 Floor Maintainer.

F-124 Floor Maintainer is a powerful concentrated neutral cleaner for cleaning floors without damage to the finish.  It is designed to thoroughly clean floors without discoloring, dulling, or removing your floors finish.  This product is great for use on epoxy and urethane floor finishes, rubber, asphalt, vinyl, linoleum, terrazzo, marble, concrete, brick and tile floors.  F-124 Floor Maintainer contains only biodegradable surfactants and no phosphates, but powerful enough to clean dirt, grease and other soils, without dulling the finish.  For daily cleaning, only about 3 ounces per gallon of ater, is all that is needed.  Helps maintain gloss finish on all floors.


PACKAGED IN:  1 GALLON CONTAINERS, 5 GALLON PAILS, 30 GALLON DRUMS AND 55 GALLON DRUMS


PRICE
1 Case (4 gallons per case) $15.90 per gallon
5 Gallon Pail $15.00 per gallon
30 Gallon Drum $13.70 per gallon
55 Gallon Drum $12.10 per gallon



F-200 Terrazzo & Stone Sealer & Finish

F-200 Terrazzo & Stone Sealer & Finish is designed for maximum adherence to terrazzo and other porous stone flooring.  It is a water based urethane fortified floor sealer that will give your floors that wet look.  F-200 Terrazzo & Stone Sealer also forms a tough foundation for spray buffing or burnishing operations.  For indoor use only.


Coverage:  Approximately 1,400 - 1,600 square feet per gallon - depending on porosity of surface applied to.
Dry Time:   20 - 40 minutes
Color:  White Emulsion that dries to a Clear Finish
Leveling:  Excellent
Odor:  Mild
 

QUANTITY PRICE
55 Gallon Drum $27.65 per gallon
30 Gallon Drum $27.95 per gallon
5 Gallon Pail $28.25 per gallon
6 x 1 Gallon Case $30.70 per gallon

 


 

NEED MORE INFORMATION?   EMAIL US


NOR-MAR flooring products are not sold through any distributors or retail outlets.

 

 

© Copyright 2017 - Nor-Mar Enterprises of Jefferson, LLC